stormwaterPaved Areas a Big Problem. Once upon a time, water pollution was caused mainly by large companies spewing out industrial wastewater and cities discharging untreated sewage into our rivers and streams. But thanks to the federal Clean Water Act (and the hard work of river advocates), those discharges are now highly restricted.

Today, Runoff of polluted rain water (also known as “stormwater”)  from paved areas, rooftops and other “impervious” surfaces is responsible for 60% of the water pollution in the state. This consists of bacteria from dog and other animal poop, excessive nitrogen from lawn fertilizers (which leads to nuisance water plants and algae), toxic herbicides and pesticides from farms, lawns and gardens, and oil, gas and trash from streets and parking lots. Every watershed in southeastern Massachusetts has rivers, streams and estuaries that violate one or more state Surface Water Quality Standards, largely due to stormwater runoff.

Paved areas also create a major flooding problem. Once a natural area is paved or a building is put up, 16 times as much rain runs off into rivers and streams, causing a rapid storm surge and sometimes flooding, instead of gradual replenishment (“recharge”) of groundwater. If adequately recharged, groundwater is slowly but steadily released into rivers and streams over the course of the year. During dry periods, the entire flow of a river may be from groundwater.

What Can We Do?

Proper Stormwater Management can greatly reduce these problems. Many watershed associations are working to get towns and cities to adopt strong stormwater management bylaws (either as a state requirement or as a local option) and you can help them do this in your town! Here’s what local bylaws can do:

For new development and redevelopment: The key is to mimic natural hydrology through Low Impact Development (LID) and other “Smart Growth” techniques. These include:

  • Minimizing impervious surfaces such as road widths;
  • Keeping natural drainage contours instead of leveling a site before construction;
  • Making impervious surfaces drain onto adjacent ground and not into storm sewers; 
  • "Clustering” houses to maximize natural areas on building lots;
  • Directing stormwater to small water quality treatment areas such as rain gardens located throughout the property. And LID almost always costs less so developers actually like it!

Towns need to:

  • Adopt a municipal stormwater bylaw that applies DEP’s wetland stormwater treatment and groundwater recharge requirements to non-wetland areas (uplands).
  • Amend any existing municipal zoning and other bylaws which discourage Low Impact Development. For example, some towns require unnecessarily wide subdivision roads, mandate connections to storm sewers, ban “cluster” zoning” or treat stormwater treatment swales as “structures” that must be set far back from property lines.       
  • Regularly inspect locally permitted projects to make sure stormwater systems are properly operated and maintained. “O&M” should be part of every local stormwater permit.
  • Be sure local rules make redevelopment projects improve currently inadequate stormwater treatment to the maximum extent possible.       
  • Establish a “Stormwater Utility,” placing a fee on new development and redevelopment projects to fund munipal stormwater upgrades that will offset the additional stormwater coming from the new development.

For existing development: In areas like southeastern Mass that are already fairly densely developed, regulating only new development (and then only if it is located in or near a wetland or floodplain) is not going to get us the groundwater recharge or pollution reduction we need. Requiring proper management of stormwater from existing developments places the costs of stormwater treatment on those who are primarily responsible for it. It also reduces municipal (and thus taxpayer) costs if stormwater from private development is treated before being discharged into municipal storm sewers which must comply with federal water pollution requirements.

Towns need to:

  •  Require existing malls, stadiums and other sites with lots of paved surfaces to upgrade currently inadequate stormwater systems.
  • Make existing developments properly operate and maintain stormwater management systems.
  • Have adequate funding for their DPW to properly manage stormwater from municipal storm sewers.

What you can do at home to reduce stormwater runoff:

  • Clean up after your pets.
  • Minimize the amounts of fertilizer, herbicides and pesticides you use (read the boxes carefully.)
  • Wash your car on your lawn rather than your driveway.
  • Direct the water sprouts coming off your roof onto your lawn, or use a rain barrel to collect the rain and use it later to water your plants (that way you’re conserving water as well as reducing runoff.
  • Build an attractive rain garden at a low point on your yard.

Watershed Action Alliance Organizations

Map of WAA member organizations